2011/2012 Sample Press & Bindery Catalog

 

DRILL BITS & PARTS

 

Challenge /Spinnit

(A)

Pioneer

                        (D)

Lawson / Miller HFD / Baum                                 .              RB (B)

Challenge

         (A-2 1/2) Long Drill

 

 

 

 

 

 

Diameter                   Capacity

      1/8”                     1”

      5/32”                   1 3/8”

      3/16”                   1 3/4”

      7/32”                   2”

      1/4”                     2”           

      9/32”                   2”

      5/16”                   2”

      11/32”                 2”

      3/8”                     2”

      13/32”                 2”           

      7/16”                   2”

      1/2”                     2”

      9/16”                   2”

 

 

Diameter                   Capacity

      3/32”                   1”           

      1/8”                     1”

      5/32”                   1 3/4”

      3/16”                   1 3/4”

      7/32”                   1 3/4”

      1/4”                     1 3/4”     

      9/32”                   1 3/4”

      5/16”                   1 3/4”

      3/8”                     1 3/4”

      7/16”                   1 3/4”

      1/2”                     1 3/4”

 

 

Diameter                      Capacity

         1/8”                     1”

         5/32”                   1 3/8”

         3/16”                   1 3/4”

         7/32”                   2 1/4”

         1/4”                     2 1/4”  

         9/32”                   2 1/4”

         5/16”                   2 1/4”

         11/32”                 2 1/4”

         3/8”                     2 1/4”

         13/32”                 2 1/4”  

         7/16”                   2 1/4”

         1/2”                     2 1/4”

         9/16”                   2 1/4”

 

 

Diameter                   Capacity

      3/16”                   2.5”

      1/4”                     2.5”        

      5/16”                   2.5”

      3/8”                     2.5”

      1/2”                     2.5”

 

 

Martin Yale Lihit / Imperial

                       (K)

Lawson / Miller HFD / Baum RB B Long

 

Spinnit

(L) 

 

              Seybold

              W Ring

 

 

 

 

       

Diameter                   Capacity

      1/8”                     1”

      5/32”                   1 3/8”

      3/16”                   1 3/4”

      7/32”                   2”

      1/4”                     2”           

      9/32”                   2”

      5/16”                   2”

 

 

Diameter                      Capacity

         1/4”                     3”

         9/32”                   3”        

         5/16”                   3”

         3/8”                     3”

         7/16”                   3”

         1/2”                     3”

 

 

Diameter                   Capacity

      1/8”                     1”

      5/32”                   1 3/8”

      3/16”                   1 3/4”

      7/32”                   2”

      1/4”                     2”           

      9/32”                   2”

      5/16”                   2”

      11/32”                 2”

      3/8”                     2”

      13/32”                 2”           

      7/16”                   2”

      1/2”                     2”

 

 

Diameter      Capacity

         1/8”                     1”

         5/32”                   1 3/8”

         3/16”                   1 3/4”

         7/32”                   2 1/4”

         1/4”                     2 1/4”  

         9/32”                   2 1/4”

         5/16”                   2 1/4”

         11/32”                 2 1/4”

         3/8”                     2 1/4”

         13/32”                 2 1/4”  

         7/16”                   2 1/4”

         1/2”                     2 1/4”

 

 

Nygren-Dahly / Baum

                       ND

         MS-2 Pencil Style

          Drill Sharpener

 

                 Lil-Bit

           Drill Sharpener

 

       MS-1 Manual

     Drill Sharpener

 

 

 

 

 

 

Diameter                      Capacity

         1/8”                     1”

         5/32”                   1 3/8”

         3/16”                   1 3/4”

         7/32”                   2 1/4”

         1/4”                     2 1/4”  

         9/32”                   2 1/4”

         5/16”                   2 1/4”

         11/32”                 2 1/4”

         3/8”                     2 1/4”

         13/32”                 2 1/4”  

         7/16”                   2 1/4”

         1/2”                     2 1/4”

 

 

·    Simple "Pencil Sharpener" Style

·    Comes With Sucker Feet For Stabilty (These Can Be Removed And The Sharpener Can Be Mounted)

·    Constructed With A Solid Carbide Cutting Head

 

Designed For Most Single-Spindle Drills.  Place Sharpener Under Drill Bit And Bring Down Drilling Head.  No Need To Remove Drill Bit.  Magnetic Base For Convenient Storage And Immediate  Availability.  Not For Use On Hydraulic Drills.  

Replacement Sharpening Head With New Magnetic Base Available

 

·          Precision Sharpener With Self-Seating, Lathe Type Construction On A Heavy Duty Base

·          Accepts Style A, H And L Drill Bits

·          Comes With Suction Feet For Stability (These Can Be Removed And The Sharpener Can Be Mounted)

·          Constructed With A Solid Carbide Cutting Head

 

 

 

 

                       Challenge   Lawson

1 1/2”X3/4” Round

2 1/2”X3/4” Round                                            

3”X3/4” Round

6”X1 1/4”X3/8”

12”X1 1/4”X3/8” Rectangular

24”X1 1/4”X3/8” Rectangular

 

           Nygren-Dahly / Baum

6-1/2"X1-1/4"X3/8" Thick Rectangular

6-1/2"X1-1/4"X5/16" Thin Rectangular

24”X1 1/4”X3/8” Rectangular

 

                   Pioneer

   2 1/4”X3/4” Round

 

                    Lawson

   8 1/2”X1 1/8”X3/8” Rectangular

   12 1/2”X 1 1/8”X3/8” Rectangular

   24”X1 1/8”X3/8” Rectangular

 

                 Iram / Sterling                                       

   10”X1’x3/16” Rectangular

 

                  Lassco Spinnet

   2 3/8”X5/8” Round With Hole

 

           Martin Yale / Lithit

   1”X11 3/4” Rectangular

   2 3/8”X11 3/4”X1/8” Rectangular

 

         Nygren -Dahly Precision Hand Sharpener
   Includes #L-105 3-Flute Carbide Paper Drill Reamer.

 

Nygren Precision Hand Drill Sharpener,nygren precision,Lawson Precision Hand Drill Sharpener,Challenge Hand Drill Sharpener,N-115,L-106,C-107,L-105, C-109, C-110,  SP-111,3-flute carbide Reamer,electric sharpener,shank,Multi-fluted Reamer,carbide drill reamer

        Lawson Precision Hand Drill Sharpener
  Includes #L-105 3-Flute Carbide Paper Drill Reamer.

 

Nygren Precision Hand Drill Sharpener,nygren precision,Lawson Precision Hand Drill Sharpener,Challenge Hand Drill Sharpener,N-115,L-106,C-107,L-105, C-109, C-110,  SP-111,3-flute carbide Reamer,electric sharpener,shank,Multi-fluted Reamer,carbide drill reamer

                     Challenge Hand Drill Sharpener
  
Includes #C-109 3-Flute Carbide Paper Drill Reamer.

 

Nygren Precision Hand Drill Sharpener,nygren precision,Lawson Precision Hand Drill Sharpener,Challenge Hand Drill Sharpener,N-115,L-106,C-107,L-105, C-109, C-110,  SP-111,3-flute carbide Reamer,electric sharpener,shank,Multi-fluted Reamer,carbide drill reamer

                          Challenge Reamer
3-Flute Carbide Reamer For Electric Sharpener. #C-110

 

 

 

                                       Nygren –Daley  Baum

 

 

 

 

Part #

Nygren-Dahly / Baum Replacement Parts

Ref #

N-1

Drill Frame

DH-16-B

N-2

Drill Spindle Sleeve

DH-23-A

N-3

Drill Spindle Sleeve Threaded Style

DH-23-B

N-4

Stripper Foot

DH-25

N-5

Gear Key

DH-100

 N-6

Spindle Lock Lever 

DH-102-C 

N-7

Drill Gear Cap

DH-103-A

N-8

Spacer Collar

DH-104

N-9

Drill Frame Cap

DH-105-A

N-10

Drill Spindle Clamp

DH-106-A

N-11

Drill Spindle Clamp Threaded Style

DH-106-B

N-12

Drill Frame Clamp Screw

DH-107

N-12A

Clamp Screw Lever Assy

DH-108-A

N-14

Drill Spindle Sleeve Cap  (Old Style)

DH-109-A

N-15

Drill Spindle Sleeve Cap

DH-109-B

N-16

Drill Spindle

DH-110-AA

N-17

Side Plate

DH-111-B

N-18

Stripper Rod

DH-115-B

N-19

Stripper Spring

DH-118-B

N-20

Drive Shaft Gear (W/Key)

DH-119

N-21

Spindle Gear

DH-120

N-22

Spindle Thrust Bearing

DH-121

N-23

Front Plate

DH-205-A

N-24

Grease Fitting

DH-206

N-25

Grease Fitting Alemite Style

DH-206-A

N-26

Lower Bushing

DH-208

N-27

Upper Bushing

DH-209

N-28

Drive Gear Washer

DH-210

N-29

Spindle Thrust Washer-Hard

DH-211

N-31

Drill Cap Screw

DH-240

N-32

1/4-20 Nut

DH-242

N-33

1/4"  Washer

DH-243

N-34

Horseshoe Clamp

S-73-A

N-35

Drill Extension For 1/8" Drills

E-1

N-36

Drill Extension For 5/32" To 7/32" Drills

E-2

N-37

Drill Extension For 1/4" To 5/16" Drills

E-3

N-38

Complete Head Assembly

 

 

We also have Drill Bits for those brands not well known.

              800 375 3787

               405 232 3053 Fax

                  405 272 0272

Lawson  Replacement Spindles

Part#

Lawson Style Spindles

Ref #

Qty

L-71

2" Capacity Long Spindle

B6309

1

L-72

3" Capacity Short Spindle

B7950

1

L-73

9/16  2"Capacity Spindle

B2847

1

L-74

Clip-Type Spindle

B8004

1

L-75

Hex-Nut Spindle

B10124

1

L-76

Needle Bearing

B11521

1

L-77

Long Lower Bushing

A2522

1

L-78

Short Lower Bushing

A7550

1

L-79

Lower Bushing For Hex-Type Spindle

B10128

1

L-80

Collet Assembly

303903

1

L-81

Spring Clip

B1009

1

L-82

Hex Nut

B10104

1

 

 

 

Drill Ease Drill

Lubricating Wax

 

 

 

Nygren Precision Hand Drill Sharpener,nygren precision,Lawson Precision Hand Drill Sharpener,Challenge Hand Drill Sharpener,N-115,L-106,C-107,L-105, C-109, C-110,  SP-111,3-flute carbide Reamer,electric sharpener,shank,Multi-fluted Reamer,carbide drill reamer

Spinnit
Multi-Fluted Reamer 1/4" Shank.      .                 SP-111

 

 

 

       MS-3 Hand Held Drill                .             Sharpener

 

Easy To Use Hand Held Sharpener  Has Carbide Cutter

 

 

 

 

Special Coatings Can Be Added To Standard Drill Bits.

·        Titanium #35 This Coating Increases Paper Drill Life Up To 400%. Some Users Even Report That They Are Self-Sharpening. This Is Caused By The Abrasiveness Of Certain Papers That Will Wear Out The Inner Core Of The Paper Drill Faster Than The Outer, Diamond-Hard Skin, Creating A Self-Sharpening Razor Edge. We Recommend This Paper Drill Coating For Most Normal To Difficult Paper Drilling Applications. It Is Especially Useful For Drilling Through Plastics.

·         

·        Teflon Provides Lubricity To The Inside And Outside Of Your Paper Drills. The Teflon Reduces Friction To Increase The Wear Life Of The Cutting Edge. This Is A Very Good Coating For Keeping Slugs From Building Up And Breaking The Paper Drills Since Slugs Flow Smoothly Without Binding. Recommended For Most Normal Paper Drilling Applications.

·         

  • Duralon - A New Coating Breakthrough! A Special Process That Merges Space-Age Alloys With Teflon And Breaks The Barrier Of Lasting Lubricity. This Maintains A `Super Tough' Teflon Coating Throughout The Life Of The Paper Drill Regardless Of The Stock. Superior For Paper Drilling Varnish, Enamel, Aqueous Or Plastic Coated Stocks. This Coating Will Not Wear Off Even After Months Of Use.

 

 

 

 

 

                       LAWSON  D&S                        CHALLENGE

 

 

 

 

 

 

 

Part #

Challenge Replacement Parts 

Ref #

C-1

Housing

6595

C-2

Spindle

6596-3

C-3   

Spacer Gear

6597

C-4    

Gear Cover

6598-2

C-5   

Spindle Spacer

6599

C-6  

Shim Spindle

6600-4

C-7   

Clamp

6601

C-8  

Adjusting Knob

6602-2

C-9    

Adjusting Bushing

6603-2

C-10

Pressure Foot Bar

6604-4

C-11

Pressure Foot

6605

C-12   

Block Bushing

6606-3

C-13 

Pressure Foot Cover

6607

C-14  

Pointer

6608

C-15    

Plunger - Teflon

6609

C-16  

Complete Head Assembly

A6594-6 

C-17    

Thin Height Lock Nut

H-5240-4

C-18    

Dowel Pin

H-5246-203

C-19   

Woodruff Key

H-6121-804

C-20  

Hex - Heavy Jam Nut

H-6529-4

C-21   

Button Head Screw

H-6910-83202

C-22   

Button Head Screw

H-6910-102403

C-23  

Socket Head Screw 

H-6918-406

C-24  

Socket Head Screw

H-6918-612

C-25  

Round Head Screw

H-6923-63204

C-26   

Cup Point Set Screw

H-6938-102404

C-27   

Set Screw - Nylock

H-6951-808

C-28  

Medium Lockwasher

H-7327-12 

C-29   

Drift Hole Cover

K-85

C-30   

Spring

S-1255-1

C-31    

Bronze Bushing

S-1719

C-32  

Bronze Bushing

S-1720

C-33 

Spindle Gear

S-1721 

C-34  

Helical Gear

S1722

C-35  

Thrust Bearing

S-1723

C-36  

Pressure Foot Spring - Inner

S-1724-2

C-37  

Pressure Foot Spring - Outer

S-1724-3

C-38  

Alemite Fitting

S-1725 

C-39   

Thrust Bearing - Oilite

S-1742

 

 

 

 

 

Part #

Lawson D & S Parts

Ref #

S-1

Pressure Foot And Rod Assembly

0037-A

S-2

Steel Ball

1028-A

S-3

Adjusting Knob

1073-A

S-4

Micro Adjusting Gear

1083-A

S-5

Bevel/Pinion Gear W/ Bronze Bushing

1084-A

S-6

Pinion Gear Shaft

1094-A

S-7

Pinion Spacer -Bronze

1095-A

S-8

Thrust Washer- Side

1097-A

S-9

Clamp Block Bar

1101-A

S-10

Sckt Cap Screw

 

S-11

Pressure Foot Spring

1110-A

S-12

Pressure Foot Stud

1112-A

S-13

Head Clamp

1643-A

S-14

Spindle Bearing

1858

S-15

Chip Slinger

1867-A

S-16

Washer

 

S-17

Screw

 

S-18

Top Plug

1878-A

S-19

Adj Knob Shaft

1882-A

S-20

Grease Cup

1885-A

S-21

Grease Plug

1906-A

S-22

Bevel Gear W/ Sleeve & Key Assembly

1919-A

S-23

L. H. Bevel Gear Bushing

1920-A

S-24

Grease Fitting- Screw Type

1922

 

 

Part #

Lawson D & S Parts

Ref #

S-25

Threaded Lower Bronze Bushing

1988-A

S-26

Threaded Micro Adjusting Shaft

2113-A

S-27

Aluminum Retainer

2114-A

S-28

Cup Set Screw

 

S-29

Cup Set Screw

 

S-30

Spindle Drive Gear

2139-A

S-31

Bronze Threaded Locking Ring

2141-A

S-32

Upper Bronze Bushing

2158-A

S-33

Flat Hd  Screw

 

S-34

Spindle Thrust Bearing

2159-A

S-35

Adjusting Knob Spring

2236-S

S-36

Cone Point Set Screw

 

S-37

Spindle Adjusting Sleeve

2253-A

S-38

Spindle

2257-A

S-39

Spindle Sleeve

2258-A

S-40

Left Hand Drill Head Housing

2259-A

S-41

Thrust Plate

2345-A

S-42

Flat Head Machine Screw

 

S-43

R. H. Bevel Gear Bronze Bushing

2559-A

S-44

R. H. Drill Head Housing

2560-A

S-45

Housing Plug

2585-B

L-80

Collet Assy

B-3039

 

 

 

 

 

 

     

 

 

LAWSON

 

 

DHP #

Lawson Style Replacement Parts

Ref #

L-1

Grease Wicking

A7461

L-2

Pressure Foot Spring (Short)

B1044

L-3

Thrust Bearing

B1289

L-4

Pressure Foot Block

B2507

L-5

Socket Head Screw

 

L-6

Thrust Washer

B2509

L-7

Top Bronze Bushing

B2511

L-7E

Top Bronze Bushing(1" Bore-Needle Brg Head)

 

L-8

Adjusting Sleeve

B2512

L-8E

Adjusting Sleeve(1" Bore-Needle Brg Head)

10129

L-9

Expansion Plug ( Not Pictured)

A2812

L-10

Thrust Washer

B2518

L-11

Bushing

B2519

L-12

Flathead Screw

 

L-13A

Thrust Plate ( Old Style 2 1/8" C.C)

 

L-13B

Thrust Plate

B2521

L-14

Flathead Machine Screw

 

L-15

Top Plug

B2801

L-16

Alemite Grease Fitting ( Not Pictured)

A4293

L-17

Locknut

B2822

L-18

Aluminum Plug

B2841

L-19

Thumb Screw

B2843

L-20

Spring

B2857

L-21

Lock Washer

B3270

L-22

1/8 Ball

B3280

L-23

Pinion

B6254

L-24

Bevel Gear

B6255

L-25A

Adjusting Knob(Old Style)

A2513

L-25B

Adjusting Knob

B6586

L-26

Bevel Gear Key

B6603

L-27A

GIB Screw (Older Style)

 

L-27B

GIB Screw

B6627

L-28

Pressure Foot Rod - Short

B7038

L-29

Socket Set Screw

B7166

L-30

Pressure Foot 

B7167

L-30E

Pressure Foot With Air Hole

 

L-31A

Wedge GIB

B6744

L-31B

Brass GIB

B7771

L-32

Socket Set Screw

 

L-33

Socket Set Screw

 

L-34

Half Dog Point Set Screw

 

L-35

Socket Set Screw

 

L-36

Cup Point Socket Set Screw

 

L-37

Cup Point Socket Set Screw

 

L-38

Presure Foot Rod (Long)

B7940

L-39

Pressure Foot Spring ( Long)

B7947

L-40A

Pressure Foot Stop With Cutout

A2503

L-40B

Pressure Foot Stop

B7951

L-41

Extension Plate

B8179

L-42

Upper Block

B8180

L-43

#8 - 32 X 1/2 Socket Head Cap Screw

 

L-44

#8 - -32 X 3/8 Socket Flathead Screw

 

L-45

P.F. Rod For Air Attachment(12 3/4")

 

L-46

Collet Wrench

B11092

L-47

Right Hand Housing

 

L-48

Left Hand Housing

 

L-49

Complete Head Assembly

 

 

 

 

 

 

                                    BAUM  LAWSON MILLLER

 

 

Part #

Lawson - Baum RB - HFD - Miller
1'' C.C. Multi-Spindle Drill Head

Ref #

L-1

Grease Wicking

A7461

L-3

Thrust Bearing

B1289

L-4

Pressure Foot Block

B2507

L-5

Socket Head Screw

 

L-6

Thrust Washer

B2509

L-12

Flat Head Screw

 

L-15

Top Plug

B2801

L-17

Locknut

B2822

L-18

Aluminum Plug

B2841

L-19

Thumb Screw

B2843

L-21

Lock Washer

B3270

L-22

Steel Ball

B3280

L-29

Socket Set Screw

B7166

L-30

Pressure Foot

B7167

L-36

Spindle Adjusting Screw

 

L-37

Locking Screw

 

L-38

Pressure Foot Rod ( Long)

B7940

L-39

Pressure Foot Spring (Long)

B7947

L-40

Pressure Foot Stop

B7951

L-41

Extension Plate

B8179

L-42

Upper Block

B8180

L-43

Socket Head Cap Screw

 

L-74

Clip Type Spindle

B8084

L-81

Spring Clip

B1009

MH-3

Socket Flat Head Screw

 

MH-4

Bearing Retainer

B7284

MH-5

Thrust Bearing

7307

MH-6

Large Bevel Gear (Modified)

B7310

ML-7

Spur Gear

B7638

ML-8

Combination Bevel/Spur Gear

B7149

ML-13-2

Bronze Bushing (Large): 2 Spindle

B7309

ML-13-3

Bronze Bushing (Large): 3 Spindle

B7309

ML-14-2

Steel Wedge Type GIB: 2 Spindle

B7327

ML-13-3

Bronze Bushing (Large): 3 Spindle

B7309

ML-14-3

Steel Wedge Type GIB: 3 Spindle

B7327

MH-15

Gib Screw

 

ML-16

Adjusting Knob

B3933

 

 

 

 

 

                                                  SEYBOLD

 

 

Part#

Seybold 511 Parts

Part#

Seybold 511 Parts

398

PF Stop

531

Top Thrust Plate

513

Plate-Bronze Gear Thrust (No Step)

534

Pressure Foot Rod Assm

514

Pinion

536

PF Bushing-Lower

516

Lockwasher

539

Clamp

516-X

Spacer

621

Adjusting Knob

517

Locknut

622

Pin Adj Knob

518

Large Bevel Gear

830

Adjusting Knob Seybold

520

Plate-Bronze Gear Thrust (W/ Step)

842

Bushing Upper PF

522

Spindle R.H. Seybold

1100

Collet R. H. Seybold

524

Adjusting Sleeve

1404

Adjusting Nut

525

Collar Spindle

1424

Lower Bearing 6002

526

Retainer Lower Bearing

1425

Bearing Lower

530

Screw Spindle Adjusting

1427

Bearing Spindle Thrust

 

 

 

 

 

                                   LAWSON BAUM MILLER

 

 

 

P/N

Lawson -Baum RB -HFD -Miller
3/4'' Multi-Spindle Drill Hd Parts

Ref #

L-1

Grease Wicking

A7461

L-3

Thrust Bearing

B1289

L-4

Pressure Foot Block

B2507

L-5

Socket Head Screw

 

L-18

Aluminum Plug

B2841

L-19

Thumb Screw

B2843

MH-1

Spring

A3593

MH-2

Steel Ball 1/16"

A3594

L-29

Socket Set Screw

B7166

L-30

Pressure Foot

B7167

L-38

Pressure Foot Rod

B7940

L-39

Pressure Foot Spring

B7947

L-40

Pressure Foot Stop

B7951

L-41

Extension Plate

B8179

L-42

Upper Block

B8180

L-43

Socket Head Cap Screw

 

L-81

Spring Clip

B1009

MH-3

Socket Flat Head Screw

 

MH-4

Bearing Retainer

B7284

MH-5

Thrust Bearing

7307

MH-6

Large Bevel Gear (Modified)

B7310

MH-7

Spur Gear

B6250

MH-8

Combination Bevel/Spur Gear

B6253

MH-9

Bronze Thrust Washer

7330

MH-11

Top Plug

B4305

MH-12

Flat Head Machine Screw

 

MH-13-2

Bronze Bushing (Large): 2 Spindle

B7326

MH-13-3

Bronze Bushing (Large): 3 Spindle

B7326

MH-14-2

Steel Wedge Type GIB: 2 Spindle

B7327

MH-14-3

Steel Wedge Type GIB: 3 Spindle

B7327

MH-15

GIB Screw

 

MH-16

Adjusting Knob

B7283

MH-17

Spindle Adjustment Screw

B8810

MH-18

Locking Screw

 

MH-19

Top Bronze Bushing

B7285

MH-20

Spindle Collar

B3587

 

 

MH-20P

Pin

 

MH-24

Long Shank Spindle

B3585

MH-21

Top Spindle

B3588

MH-25

Spool Shank Spindle

B3586

MH-22

Adjustment Sleeve (Long)

B7281

MH-26

Lower Bronze Bushing

B7286

MH-23

Adjustment Sleeve (Short)

B7282

MH-27

Flat Head Machine Screw

 

 

 

 

 

 

                                                  SEYBOLD

 

 

Part#

Seybold 1260

 

 

398

PF Stop

1244

Adj Screw

531

Top Thrust Plate

1252

Pinion Thrust Stand

534

Pressure Foot Rob Assm

1254

Clamp

536

PF Bushing-Lower

1255

Large Bevel Gear

621

Spring Adj Knob

1256

Pinion Gear

622

Pin Adj Knob

1258

Thrust Plate-Side

830

Adjusting Knob Seybold

1281

Bronze Cage

842

Bushing Upper PF

1283

Retainer Lower Bearing

1231

Adjusting Sleeve

1284

Spindle Seybold

1234

U-Shape Pinion Stand Washer

1291

U-Cup Holder

1235

Square Nut Pinion

1334

Spring PF (511 & 1260)

1238

Hex Coupler

1405

Adjusting Nut

1239

Plate Adjusting Nut Cover

1423

Bearing 8 Magneto

1241

Spacer For Pinion Assm

1424

Lower Bearing 6002

1242

Collar

1426

Thrust Bearing

1243

Collet L. H. Seybold

1431

U-Cup

 

 

 

 

 

Paper Drilling Tips For Maximum Performance

Seating

Seat Paper Drills Up Past The Drive Pin And Up Against The Shoulder Keep The Inside Of The Spindle Clean With A Small Toothbrush And Solvent, Paying Particular Attention To The Drive Pin.

 

Keep Drill Bits Sharp 

The Primary Cause Of Paper Drill Breakage And Poor Work Quality Is A Dull Bit. For Best Results, Paper Drill Bits Should Be Sharpened After Every 4 To 8 Hours Of Use. They Should Be Sharpened Even More Often When Drilling Through Hard Stocks, Fiberboard Or Abrasive Stocks.

 

Keep Drill Bits Clean

Clogging Is Another Cause Of Broken Bits. This Is A Commonly Occurring Situation When Drilling Through Books Bound With Glue. If The Interior Surface Of The Bit Is Not Cleaned After A Shift Change Or Break, The Glue Residue Hardens, Impeding Bit Performance To The Point Of Snapping. Be Sure To Clean Out Bits After Each Use, And When Not In Use, Paper Drill Bits Can Be Lightly Oiled To Prevent Rust And Corrosion.

 

Lubricate Drills Or Use Coated Paper Drills

Coated Drills Bits Such As Titanium #35, Teflon And Duralon Are Available. Coating Allows For Easier Paper Drilling Of Varnish, Laminated And Aqueous Coated Stocks. Also Available Is The Drill Ease Lubricating Stick Which Can Be Applied To The Paper Drill Bit Every Few Strokes, Causing The Bit To Function Much Like A Coated Paper Drill Bit.

 

Suggestions For Speed & Feed

Increase The Rpm Of The Paper Drill Bit When Paper Drilling Smaller Diameters (1/8" Or 3/16"). Accordingly, Decrease The Rpm In Proportion To Increasing The Diameter Of The Bit (I.E., 1/2" Bits Should Be Run Much Slower Than 1/8").

The Feed (Or Strokes Per Minute) Should Be Adjusted Depending On The Type Of Stock To Be Penetrated. Generally, The Softer The Stock Being Drilled, The Slower The Feed. A Good Starting Point For 1/4" Bit Paper Drilling Through 2" Of 10 Lb. Stock Is 2000-2500 Rpm At Strokes Per Minute.

Remember That A Paper Drill Must Cut/Drill The Paper, Not Punch It Like A Hammer. Give The Bit Time To Drill The Paper. Keep In Mind That The Paper Drill Should Never Turn Purple From Overheating

 

 

 

Suggested Spindle Speeds (Rpm) And

Stroke (Passes Per Minute)

For Mimeo/Bond Paper 16 To 24 LB. Range

 

 

 

Note: All Speeds And Feeds Are For Starting Point Reference Only.

 

1. Spindle Speeds Can Be Adjusted For The Following Reasons:

   A. The Harder The Stock (Chip Board, Etc) –

      Slow Down The Speed

   B. Card Stock Or 70/80 LB Stock – Slow Down

      The Speed

   C. If Using Teflon Or Duralon – Speeds Can

      Be Increased Slightly

2. Stroke Can Be Increased Or Decreased Based Upon The Following:

      A. If Drilling Multiple Books – Slow Down

         Stroke To Alleviate Books Slipping Out

         Of Line

      B. If Drilling Only One Book – Speed Up

         Stroke To Increase Production

   C. If Drilling 3/8” Diameter Or Larger Holes –

      Slow Down Stroke To Allow Clean Cutting

      D. If Drilling Hard Or Gummy Stock – Slow

         Down Stroke To Allow Clean Cutting And

         Overheating Of Bits

 

 

Drill Bit Diameter

Suggested Spindle Speed

Suggested Stroke

1/8

3200

16

5/32

2800

16

3/16

2400

15

7/32

2200

15

1/4

2000

14

9/32

1900

14

5/16

1800

14

11/32

1700

13

3/8

1600

13

13/32

1500

13

7/16

1500

13

1/2

1400

13