COUNTERS

 

 

Olden Enterprises RTC (Rate & Total Count) And TC (Total Count) Counters Are Fully Electronic With No Moving Parts. Both Feature Very Large And Bright Led Displays. The Display Can Easily Be Read From 15 Feet Away.

*      The Sensor Counts Using Invisible Infrared Light. Nothing Ever Touches The Piece Being Counted, Which Can Be Up To 2” Away.

*      RTC & TC Counters Have An Electronic Memory That Uses Advanced Electronic Circuitry To Retain The Count. There Is No Battery That Ever Needs Replacement!

*      The Rtc Counter Display Can Be Switched To Display The Count Rate In Pieces Per Hour. The Rate Function Is Displayed Until The Next Push Of The Count/Rate Switch.

*      Sensor Has A 10’ Curly Cord And Mounts With Its Own Magnet. Adapters Are Provided For Non-Magnetic Surfaces.

*      Counters Come With A New Generation Sensor And Standard 6” Post Mount.

Counter Body Is Compact And Easy To Install Without Tools.

The Counters Are Used On Folders, Stitchers, And Other Bindery Equipment, As Well As Various Inserters, Mailing Machines, Etc. They Mount To The Machine With One Of Four Available Mounts. The Half-Round At The End Of The Post Slides Into A Matching Hole In The Bottom Of The Counter Case. The Post Mount Slides Over Any Vertical Edge Up To 5/8” Thick And Is Secured By A Thumbscrew.

 

 

Optional Mounts: The Magnetic Base Mount Features An Adjustable Post, Which Attaches With A Strong Magnet To A Horizontal Surface And Has The Short Post That Can Be Tilted Up/Down And Locked In Place. This Allows The Display To Be Aimed At The Operator’s Eyes. The Vertical Magnetic Base Mount (Not Pictured) Has A Straight, Non-Adjustable Post And Is Designed To Allow The Counter To Be Mounted On Vertical Surfaces. The Adjustable Post Mount Has A Short Post That Can Be Tilted Up/Down And Locked In Place, Aiming The Display At The Operator’s Eyes.

 

Specifications:

Power Requirements: 110 Volts, 60 Hz, 5 Watts
Maximum Counting Speed: 200,000+ Per Hour
Maximum Count: 999,999
Counter Size: 5.5”W X 3.5”H X 2.3”D
Sensor Size: 1.5” X 1” X .6”
Each Counter Is Bench Tested For 100 Hours, And Includes A One-Year Warranty On Parts ,Materials,and Workmanship

 

 

 

The Olden Enterprises Batch Counter Is A Seven Digit Total Counter, Two Rate Meters And Job Time Display In One Compact, Easy To Operate Unit. Four Digit Maximum Batch Size. Variable Delay Time Controls Feeder Or Conveyor. The Counter Body Can Be Ordered With Different Accessory Packages For Use On Folders, Stitchers, Inserters, Etc. Easy To Install On Most Baum, O&M, MBM, Stahl & MBO Folder Models. Uses The Same Mounts Shown Above. Contact Your Olden Enterprises Dealer Or The Factory For Details On Selecting The Accessory Package For Your Application

Specifications:
Max. Counting Speed: 400,000+ Per Hour
Max. Rate Displayed: 90,000 Per Hour
Power Required: 110 Volts, 60 Hz, 5 Watts
Running Time Displayed: 99.99 Hours
Max. Total Count: 9,999,999
Preset Batch Delay: 0.1 - 9.9 Seconds
Preset Batch Size: 1 - 9999
Counter Size: 5.5”W X 3.5”H X
2.3”D

Sensor Size: 1.5” X 1” X .6”

 

 

                   ITEM

PART NO.

TOTAL COUNTER

 with sensor & post mount

TC

 TOTAL COUNTER

 with sensor & adjustiable post mount

TCA

TOTAL COUNTER

 with sensor & magnetic base mount

TCM

RATE & TOTAL COUNTER

 with sensor & post mount

RTC

RATE & TOTAL COUNTER

 with sensor & adjustable post mount

RTCA

RATE & TOTAL COUNTER

 with sensor & magnetic base mount

RTCM

BATCH COUNTER

 with sensor & choice of mounts

BC

BATCH COUNTER&RELAY KIT

with sensor & choice of mounts (mbo or stahl folders)

BC&R

BATCH COUNTER &VACUMN VALVE KIT

with sensor choice of mounts (baum,o&m,mbm 352s)

BC&V

 

 

                                                                                                           ACCESSORIES

SENSOR FOR MODEL 100 A MEMORY BATCH COUNTER

 

SEN

SENSOR FOR TC & RTC

 

SENR

AC ADAPTER FOR MODEL 100 A

 

X

AC TRANSFORMER FOR BATCH COUNTER

has female plug with chrome locking ring

X-BC FEMALE

AC TRANSFORMER FOR BATCH COUNTER

has male mini plug

X-BC MALE

POST MOUNT CLAMP

with 5 ¾” post

PM

ADJUSTIABLE POST MOUNT

clamp with adjustable angle post

AMP

MAGNETIC BASE MOUNT

with adjustiable angle post

MBM